StarTech.com 3-Port M.2 SSD (NGFF) Adapter Card - 1 x PCIe (NVMe) M.2 2 x SATA III M.2 - PCIe 3.0 - PCI Express 3.0 M.2 NGFF Card - SSD Host Card (PEXM2SAT32N1)
Actual product may differ
- 3402268
- PEXM2SAT32N1
- 65030865708
- StarTech.com
- Other Adapters & Converters
- $115.05
- Out of stock (check availability)
Can't wait? We may have more Other Adapters & Converters from StarTech.com in stock.
Pricing & availability
Overview
Features
Specs
Display & graphics
Ports & expansion
Exterior & appearance
Environment & regulatory
- CE
- FCC
Packaging
- 3-port M.2 NGFF SSD Adapter Card
- 1 x Low-Profile Bracket
- 3 x M.2 Mounting Screws
- 3 x M.2 Mounting Standoffs
- 3 x M.2 Mounting Nuts
- 1 X Screw Driver
- 1 X Quick Start Guide
Product info
Service & support
Other
- Bus Type PCI Express
- Card Type Standard Profile (LP bracket incl.)
- Industry Standards Serial ATA 3.0 specification - SATA I/II/III (1.5/3/6Gbps)
- PCI Express 3.0
- Interface M.2 SATA (NGFF)
- SATA
- M.2 PCIe (NVMe)
- Port Style Integrated on Card
- Ports 3
- ATAPI Support Yes
- Bootable Yes
- MTBF 50,000 Hours
- Port Multiplier No
- RAID No
- Type and Rate SATA III (6 Gbps)
- Connector Type(s) 1 - PCI Express x4 Male
- Internal Ports:
- 3 - M.2 (NGFF
B-Key) Receptacle - 2 - SATA (7 pin
Data) Plug - Humidity 20%~80% RH (Non-condensing)
- Operating Temperature 5°C to 50°C (41°F to 122°F)
- Storage Temperature -25°C to 70°C (-13°F to 158°F)
Connector(s) | |
Connector Type(s) | PCI Express x4 Male |
Internal Ports | M.2 (NGFF, B-Key) Receptacle |
M.2 (NGFF, M-Key, PCIe x4) Receptacle | |
SATA (7 pin, Data) Plug | |
Environmental | |
Humidity | 20%~80% RH (Non-condensing) |
Operating Temperature | 5°C to 50°C (41°F to 122°F) |
Storage Temperature | -25°C to 70°C (-13°F to 158°F) |
Hardware | |
Bus Type | PCI Express |
Card Type | Standard Profile (LP bracket incl.) |
Industry Standards | PCI Express 3.0 |
Serial ATA 3.0 specification - SATA I/II/III (1.5/3/6Gbps) | |
Interface | M.2 PCIe |
M.2 SATA | |
SATA | |
Port Style | Integrated on Card |
Ports | 3 |
Indicators | |
LED Indicators | M.2 drive status/activity |
Power | |
Packaging Information | |
Shipping (Package) Weight | 122 g [4.3 oz] |
Performance | |
ATAPI Support | Yes |
Bootable | Yes |
MTBF | 50,000 Hours |
Port Multiplier | No |
RAID | No |
Type and Rate | SATA III (6 Gbps) |
Physical Characteristics | |
Product Height | 120 mm [4.7 in] |
Product Length | 120 mm [4.7 in] |
Product Weight | 46 g [1.6 oz] |
Product Width | 20 mm [0.8 in] |
Software | |
OS Compatibility | OS Independent; No additional drivers or software required Note: When installed in a compatible operating system, the card is natively supported and doesn’t require any additional drivers or software. However, your operating system must natively support PCIe SSDs (NVMe - Non-Volatile Memory Express). |
Special Notes / Requirements | |
Note | The maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen 1.0 enabled computers, the max throughput is 2.5Gbps per lane. If used with PCI Express Gen 2.0 enabled computers, the max throughput is 5Gbps per lane. |
System and Cable Requirements | A computer enabled with PCI Express (PCIe), and an available PCI Express x4, x8, or x16 slot |
An operating system that natively supports PCIe SSDs (NVMe), such as: - Windows 7 and later - Mac OS 10.10.3 and later | |
One or two SATA host ports on the host computer (for example, the SATA controller card, or the motherboard SATA ports inside of your computer) | |
What's in the Box | |
Included in Package | 3-port M.2 NGFF SSD adapter card |
low-profile bracket | |
M.2 mounting nuts | |
M.2 mounting screws | |
M.2 mounting standoffs | |
quick-start guide | |
screwdriver |
Customer ratings & reviews
Be the first to write a review