D-Link 24-Port 10/100/1000Mbps & 4-Port Combo SFP L2 Stackable Managed Switch (DGS-3120-24TC)

The DGS-3120 xStack Switches are enhanced L2 stackable switches designed to connect end-users in a secure SMB or enterprise network. These switches support physical stacking, multicast and enhanced security, making them an ideal Gigabit access layer solution for any network.

Features

• 24 1000Base-T ports with 4 Combo SFP ports
• Stackable up to 6 units via 40Gbps CX4 stacking
  (Stacking cable DEM-CB50 or DEM-CB100 is required for stacking)
• Redundant Power Supply support
• Enhanced features including ACLs, IPv6 support, static routing, IP-MAC binding, Guest VLANs
• Supports standards-based management protocols including SNMP, RMON, Telnet, a Web-based GUI and SSH/SSL
• D-Link Green Technology, which includes a power saving mode, smart fan, reduced heat dissipation , cable length detection and time-based PoE
• Standard Image features and Enhanced Image features for multiple network requirements
• Limited Lifetime Warranty
• Advance Warranty Replacement (24 Hour Cross-shipment)

 

Product Description
The DGS-3120 xStack Series are enhanced L2 access stackable switches designed to connect end-users in a secure SMB or enterprise network. These switches support physical stacking multicast and enhanced security making them an ideal Gigabit access layer solution.

Standard and Enhanced Images
The DGS-3120 Series is embedded with two different software images - Standard Image (SI) and Enhanced Image (EI). The Standard Image provides sophisticated features for campus or enterprise. It includes advanced Quality of Service (QoS) traffic shaping L2 multicasting and robust security features. The Enhanced Image supports ERPS Double VLAN (Q-in-Q) Ethernet OAM Static Route IMPB sFlow IPv6 features which are suitable for the next generation IPv6 networks or triple play applications in Metro Ethernet.

Enhanced Network Reliability
The DGS-3120 Series targets enterprise/campus and customers who require a high level of network security and maximum uptime. All the models in DGS-3120 Series support an external redundant power supply so that continued operation can be assured. They also include other features such as 802.1D Spanning Tree (STP) 802.1w Rapid Spanning Tree (RSTP) and 802.1s Multiple Spanning Tree (MSTP) Loopback Detection (LBD) and Broadcast Storm Control that enhance network resilience. The G.8032 Ethernet Ring Protection Switching (ERPS) function minimizes the recovery time to 50 ms. For load sharing and redundancy backup in switch cascading/server attachment configuration the DGS-3120 Series provides dynamic 802.3ad Link Aggregation Port Trunking. Comprehensive Security The DGS-3120 Series provides users with the latest security features such as Multi-layer and Packet Content Access Control Lists (ACL) Storm Control and IP-MAC-Port Binding (IMPB) with DHCP Snooping. The IP-MAC-Port Binding feature allows administrators to bind a source IP address with an associated MAC and also define the port number to enhance user access control. With the DHCP Snooping feature the switch automatically learns IP/MAC pairs by snooping DHCP packets and saving them to the IMPB white list. In addition the D-Link Safeguard Engine identifies and prioritizes “CPU interested” packets to prevent malicious traffic from interrupting normal network flows and to protect switch operation.

Identity Driven Network Policies
The DGS-3120 Series supports authentication mechanisms such as 802.1X Web-based Access Control (WAC) and MAC-based Access Control (MAC) for strict access control and easy deployment. After authentication individual policies such as VLAN membership QoS policies and ACL rules can be assigned to each host. In addition the switch also supports Microsoft® NAP (Network Access Protection). NAP is a policy enforcement technology that allows customers to protect network assets from unhealthy computers by enforcing compliance with network health policies.

Traffic Management for Triple Play
The DGS-3120 Series implements a rich set of multilayer QoS/CoS features to ensure that critical network services like VoIP video conference IPTV and IP surveillance are served with high priority. The Traffic Shaping features guarantee bandwidth of these services when the network is busy. With L2 Multicast support the DGS-3120 shows its ability to handle growing IPTV applications. Host-based IGMP/MLD Snooping allows multiple multicast subscribers per physical interface and ISM VLAN sends multicast streams in a multicast VLAN to save bandwidth and to provide better security to the backbone network. The ISM VLAN profiles allow users to bind/replace the pre-defined multicast registration information to subscriber ports quickly and easily.

Proactive Effective Network Management
To uphold enterprise customers’ Service Level Agreements (SLA) service providers must reduce the Mean Time to Repair (MTTR) and increase service availability. Ethernet OAM features address these challenges and enable service providers to offer carrier-grade services. The DGS-3120 Series supports industry-standard OAM tools including IEEE 802.3ah IEEE802.1ag and ITU-T Y.1731. Connectivity Fault Management (CFM) provides tools to monitor and troubleshoot end-to-end Ethernet networks allowing service providers to check connectivity isolate network issues and identify customers affected by network issues.

IPv6 Technology
The DGS-3120 Series is fully compliant with the future IPv6 networks. It supports remote IPv6 manageability from telnet HTTP or SNMP. To create secure IPv6 networks the DGS-3120 Series uses IPv6 ACL DHCPv6 Snooping and Neighbor Discovery (ND) snooping functions to protect the network from illegal IPv6 clients. The DGS-3120 Series has been certified with IPv6 Ready Logo Phase 2 from the IPv6 forum a worldwide IPv6 advocacy consortium. The IPv6 Ready Logo Program provides conformance and interoperability of IPv6 products. D-Link Green TechnologyD-Link is striving to take the lead in developing innovative and power-saving technology that does not sacrifice operational performance or functionality. The DGS-3120 Series implements the D-Link Green Technology which includes a power saving mode smart fan reduced heat dissipation and cable length detection. The power saving feature automatically powers down ports that have no link or link partner. The Smart Fan feature allows for the built-in fans to automatically turn on at a certain temperature providing continuous reliable and eco-friendly operation of the switch.

Manageability
D-Link’s Single IP Management (SIM) simpliflies and speeds up management tasks allowing multiple switches to be configured monitored and maintained from any workstation running a web browser through one unique IP address. This virtual stack is managed as a single object having all units maintained by one IP address. The DGS-3120 Series also supports standard-based management protocols such as SNMP RMON Telnet Console Web-based GUI and SSH/SSL security authentication.